Invisible Penetrating Sealer 1 Gallon

Suitable for bricks, pavers, manufactured & natural stone, retaining walls and concrete.

• Chemically Bonded Ultimate Protection:  Deep Surface Penetration, Superior Longevity & Durability
• Silane/Siloxane Solvent-Based Blend:  Excellent Water Repellency & Safeguards Surface from Salt Attack
• Non-Film Forming with Transparent Finish:  Does Not Alter the Appearance of Most Surfaces
• Breathable, Immediate Application:  Does Not Trap Moisture or Efflorescence

StonehengeUS Invisible Penetrating Sealer is a solvent-based silane/siloxane invisible penetrating sealer. It is recommended for outdoor use, on old and new, horizontal or vertical surfaces. StonehengeUS Invisible Penetrating Sealer can be applied immediately after most surface installations, as it is breathable and will not trap naturally occurring moisture or efflorescence. On new concrete, StonehengeUS Invisible Penetrating Sealer should be applied once concrete is fully cured (30 days after installation). StonehengeUS Invisible Penetrating Sealer protects surfaces from water penetration and salt damage from the use of de-icers or exposure to salt air. Due to its superior water repellency, StonehengeUS Invisible Penetrating Sealer helps to reduce biological growth such as mold, moss and algae. StonehengeUS Invisible Penetrating Sealer has the consistency of water, is clear when applied and dries transparent on most surfaces.  Some surfaces may darken slightly. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).

Coverage Per Gallon

Coverage based on two coats applied wet-on-wet. Use approximately two thirds of the estimated amount on the first coat and one third on the second ensuring saturation. Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature & humidity.