Wet Look Sealer 5 Gallon

Suitable for bricks, pavers, manufactured & natural stone, retaining walls and concrete.

• Multi-Purpose Product: Seals and Enhances Surface, Hardens Joint Sand
• Antifungal Film Protection: Protects Sealer Film from Mold, Moss & Algae
• Stain Resistant: Promotes Easier Cleaning & Maintenance
• Stabilizes Joint Sand: Reduces Sand Washout, Weeds & Insect Infestation
• Surface Enhancement: Deeply Enhances Surface Tone & Semi-Gloss Finish
• Rain Safe in 90 Minutes: Minimizes Rain Affecting Your Sealing Schedule
• Breathable, Immediate Application: Does Not Trap Moisture or Efflorescence

StonehengeUS Wet Look Joint Stabilizing Sealer is a solvent-based advanced premium acrylic sealer that is ‘rain safe’ 90 minutes after application and will not yellow under exposure to sunlight. It is recommended for outdoor use only, on old and new, horizontal or vertical surfaces to provide surface protection and stabilize newly installed joint sand in one application process. StonehengeUS Wet Look can be applied immediately after surface installation, as it is breathable and will not trap naturally occurring moisture or efflorescence. StonehengeUS Wet Look protects the surface from salts, acids and other corrosive chemicals as well as minimizes overall surface weathering and deterioration. On a newly installed or restored surface, StonehengeUS Wet Look will deeply enhance surface tone with a StonehengeUS Wet Look, semi-gloss finish and provide stain resistance which makes cleaning and maintenance easier. StonehengeUS Wet Look is specially formulated with an antifungal designed to inhibit the growth of mold, moss and algae on the sealer film. StonehengeUS Wet Look has the consistency of water and dries clear with semi-gloss finish. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).

Joint Stabilizing Sealers can be used just as a sealer for pavers, concrete and other masonry surfaces without joint sand stabilization.

Coverage Per Gallon

Per gallon. Single application. Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and site conditions such as temperature. For a more uniform coverage or if desired, a second coat may be applied after first coat has dried to the touch.